## Background

Backpropagation is a common method for training a neural network. There is no shortage of papers online that attempt to explain how backpropagation works, but few that include an example with actual numbers. This post is my attempt to explain how it works with a concrete example that folks can compare their own calculations to in order to ensure they understand backpropagation correctly.

## Backpropagation in Python

You can play around with a Python script that I wrote that implements the backpropagation algorithm in this Github repo.

## Backpropagation Visualization

For an interactive visualization showing a neural network as it learns, check out my Neural Network visualization.

## Additional Resources

If you find this tutorial useful and want to continue learning about neural networks, machine learning, and deep learning, I highly recommend checking out Adrian Rosebrock’s new book, Deep Learning for Computer Vision with Python. I really enjoyed the book and will have a full review up soon.

## Overview

For this tutorial, we’re going to use a neural network with two inputs, two hidden neurons, two output neurons. Additionally, the hidden and output neurons will include a bias.

Here’s the basic structure:

In order to have some numbers to work with, here are the initial weights, the biases, and training inputs/outputs:

The goal of backpropagation is to optimize the weights so that the neural network can learn how to correctly map arbitrary inputs to outputs.

For the rest of this tutorial we’re going to work with a single training set: given inputs 0.05 and 0.10, we want the neural network to output 0.01 and 0.99.

## The Forward Pass

To begin, lets see what the neural network currently predicts given the weights and biases above and inputs of 0.05 and 0.10. To do this we’ll feed those inputs forward though the network.

We figure out the *total net input* to each hidden layer neuron, *squash* the total net input using an *activation function* (here we use the *logistic function*), then repeat the process with the output layer neurons.

*net input*by some sources.

Here’s how we calculate the total net input for :

We then squash it using the logistic function to get the output of :

Carrying out the same process for we get:

We repeat this process for the output layer neurons, using the output from the hidden layer neurons as inputs.

Here’s the output for :

And carrying out the same process for we get:

### Calculating the Total Error

We can now calculate the error for each output neuron using the squared error function and sum them to get the total error:

For example, the target output for is 0.01 but the neural network output 0.75136507, therefore its error is:

Repeating this process for (remembering that the target is 0.99) we get:

The total error for the neural network is the sum of these errors:

## The Backwards Pass

Our goal with backpropagation is to update each of the weights in the network so that they cause the actual output to be closer the target output, thereby minimizing the error for each output neuron and the network as a whole.

### Output Layer

Consider . We want to know how much a change in affects the total error, aka .

By applying the chain rule we know that:

Visually, here’s what we’re doing:

We need to figure out each piece in this equation.

First, how much does the total error change with respect to the output?

Next, how much does the output of change with respect to its total net input?

The partial derivative of the logistic function is the output multiplied by 1 minus the output:

Finally, how much does the total net input of change with respect to ?

Putting it all together:

You’ll often see this calculation combined in the form of the delta rule:

Alternatively, we have and which can be written as , aka (the Greek letter delta) aka the *node delta*. We can use this to rewrite the calculation above:

Therefore:

Some sources extract the negative sign from so it would be written as:

To decrease the error, we then subtract this value from the current weight (optionally multiplied by some learning rate, eta, which we’ll set to 0.5):

We can repeat this process to get the new weights , , and :

We perform the actual updates in the neural network *after* we have the new weights leading into the hidden layer neurons (ie, we use the original weights, not the updated weights, when we continue the backpropagation algorithm below).

### Hidden Layer

Next, we’ll continue the backwards pass by calculating new values for , , , and .

Big picture, here’s what we need to figure out:

Visually:

We’re going to use a similar process as we did for the output layer, but slightly different to account for the fact that the output of each hidden layer neuron contributes to the output (and therefore error) of multiple output neurons. We know that affects both and therefore the needs to take into consideration its effect on the both output neurons:

Starting with :

We can calculate using values we calculated earlier:

And is equal to :

Plugging them in:

Following the same process for , we get:

Therefore:

Now that we have , we need to figure out and then for each weight:

We calculate the partial derivative of the total net input to with respect to the same as we did for the output neuron:

Putting it all together:

You might also see this written as:

We can now update :

Repeating this for , , and

Finally, we’ve updated all of our weights! When we fed forward the 0.05 and 0.1 inputs originally, the error on the network was 0.298371109. After this first round of backpropagation, the total error is now down to 0.291027924. It might not seem like much, but after repeating this process 10,000 times, for example, the error plummets to 0.0000351085. At this point, when we feed forward 0.05 and 0.1, the two outputs neurons generate 0.015912196 (vs 0.01 target) and 0.984065734 (vs 0.99 target).

If you’ve made it this far and found any errors in any of the above or can think of any ways to make it clearer for future readers, don’t hesitate to drop me a note. Thanks!

Как устроена нейросеть / Блог компании BCS FinTech / Хабр

Thanks for this nice illustration of backpropagation!

I am wondering how the calculations must be modified if we have more than 1 training sample data (e.g. 2 samples).

It seems that you have totally forgotten to update b1 and b2! They are part of the weights (parameters) of the network. Or am I missing something here?

We never update bias. Refer Andrew Ng’s Machine Learning course on coursera

Thanks to your nice illustration, now I’ve understood backpropagation.

This is exactly what i was needed , great job sir, super easy explanation.

Just wondering about the range of the learning rate. Why can’t it be greater than 1?

Hi Matt

Thanks for giving the link, but i have following queries, can you please clarify

1. Why bias weights are not updated anywhere

2.Outputs at hidden and Output layers are not independent of the initial weights chosen at the input layer. So for calculated optimal weights at input layer (w1 to w4) why final Etot is again differentiated w.r.t w1, instead should we not calculate the errors at the hidden layer using the revised weights of w5 to w8 and then use the same method for calculating revised weights w1 to w4 by differentiating this error at hidden layer w.r.t w1.

3.Error at hidden layer can be calculated as follows: We already know the out puts at the hidden layer in forward propagation , these we will take as initial values, then using the revised weights of w5 to w8 we will back calculate the revised outputs at hidden layer, the difference we can take as errors

4. i calculated the errors as mentioned in step 3, i got the outputs at h1 and h2 are -3.8326165 and 4.6039905. Since these are outputs at hidden layer , these are outputs of sigmoid function so values should always be between 0 and 1, but the values here are outside the outputs of sigmoid function range

Please clarify why and where the flaw is

Awesome tutorial!

But are there possibly calculation errors for the undemonstrated weights? I kept getting slightly different updated weight values for the hidden layer…

But let’s take a simpler one for example:

For dEtotal/dw7, the calculation should be very similar to dEtotal/dw5, by just changing the last partial derivative to dnet o1/dw7, which is essentially out h2.So dEtotal/dw7 = 0.74136507*0.186815602*0.596884378 = 0.08266763

new w7 = 0.5-(0.5*0.08266763)= 0.458666185.

But your answer is 0.511301270…

Perhaps I made a mistake in my calculation? Some clarification would be great!

Vectorization of Neural Nets | My Universal NK

After many hours of looking for a resource that can efficiently and clearly explain math behind backprop, I finally found it! Fantastic work!